The threaded mounting shaft can be removed from the projector to free up almost an inch of depth for those who don't need/want it. The integrated mag-lev fan is sunk into the heat sink, keeping space to a minimum without sacrificing the ability to stay cool. The wiring is clean, out of the way, and can be disconnected with ease. The precision and existence of mostly die-cast (rather than stamped) parts in the cutoff shield mechanism makes for a slop-free setup and conveys quality over cost savings. It could pass for an OEM part.
- #9 in overall output (compared to the top D2S projectors)
- #2 Bi-LED projector
- Hotspot LUX @ 100ft: 60
- Width LUX @ 100ft: 7
- Weighted Average LUX: 33.5
WHAT'S INCLUDED: When you purchase a pair of MLED projectors you're getting three components in one package. There's no need to purchase separate bulbs or ballasts, they're all built in!
INSTALLATION SUMMARY: On an H4-based headlight reflector for example...Remove the headlight lens, insert the threaded mounting shaft through the pre-existing hole in the back of the reflector, add the alignment plate, tighten the lock ring, and re-seal the headlights. For other applications, minimal cutting will probably be involved but you'll find the results well worth it! The MLED can also be mounted with the existing mounting holes for a nut and bolt install.
PERFORMANCE HIGHLIGHTS: Don't be fooled by 'clever marketing' from other companies. Ask for LUX figures vs the other top performers and ensure you make an informed, quantified decision!